BATTERY MATCHING NOW CHEAPER, FASTER AND MORE ACCURATE!
 

• Reads down to .001 volts - (Example 1.165)
• Milliwatt hours standard - shows total power of cell combining amps, time, and volts.
• 30 amps maximum discharge rate  standard
• Low cost - $223/cell vs old 30 amp Turbomatcher at $332/cell.
• Turboflex charging selectable - reduces cell - venting by breaking up gas bubbles, lowers impedance.
• Peak detect voltage settable - .01 to .09 volts.
• Stores up to 3 different setups - automatically uses last setup used upon power up.
• Relative Internal Resistance is standard
• Milliamp hours standard - shows standard rating of cell (Example....2000).
• Require E-prom upgrade to cycle NiMh cells.

 

Operating instructions (pdf)